The adapter plate is designed for my top box, but will work with most aluminum top cases of other manufacturers.
The plate is laser cut from 3mm (1/8")
has a quick-release function for the top box and is lockable.
The plate will be attached with 4 screws to the original rack. The screws replace the original screws, no drilling necessary.
The top box with the 4 holding pucks is set into the 4 slots, and then moved forward to the end of the slots. The locking plate is set around the front puck on each side, and then moved forward until the holes align. Then the whole thing can be locked with a padlock on each side, and so the top box is protected from theft. With a little experience the top case can be put on or off in less then 30 seconds. No tools necessary!
The top box covers the tools and protects them from theft. After removing the top box the tools are accessible again.
Light weight, only 0.6 kg (1.3 pounds) -- spare parts available
Surfaces anodized for long lasting corrosion and scratch resistance.
Aluminium adapter plate
steel locking plate
steel screws for the adapter plate
steel holding plates
steel screws with washers for the holding plates
steel screws with washers for the pucks
(pre-assembled if ordered together with a top box)